Removing The Dynamiclom Module; Preliminary Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.8.3

Removing the DynamicLoM module

Upgrade and Repair Unit
(URU)
Tool: – Phillips PH0 / (+) No. 0 screw driver
– hexagon screw driver 5 mm
9.8.3.1

Preliminary steps

"Disabling SVOM boot watchdog functionality" on page 70
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
9.8.3.2 Removing the DynamicLoM module
Figure 164: Removing the DynamicLoM module
Ê Remove the screws.
Ê Remove the DynamicLoM module.
260 Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2540 M1