Expansion cards and backup units
9.6.2
Removing riser module 1 (FL)
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
9.6.2.1
Preliminary steps
Ê If applicable,
"Locating the defective server" on page 51
"Disabling or suspending BitLocker functionality" on page 69
Ê
"Shutting down the server" on page 53
Ê
Ê If applicable, remove all external cables from the expansion card to be
removed.
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê If applicable, disconnect internal cables from the GPGPU card.
220
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
RX2540 M1