Removing Expansion Cards; Preliminary Steps; Removing An Expansion Card - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Ê If applicable, "Updating RAID controller firmware" on page
Ê If applicable, "Enabling Option ROM scan" on page
"Enabling SVOM boot watchdog functionality" on page 86
Ê
"Enabling BitLocker functionality" on page 92
Ê
9.4.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
9.4.2.1

Preliminary steps

"Locating the defective server" on page 51
Ê
"Disabling or suspending BitLocker functionality" on page 69
Ê
"Disabling SVOM boot watchdog functionality" on page 70
Ê
"Shutting down the server" on page 53
Ê
Ê Remove all external cables from the expansion card to be removed.
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
9.4.2.2

Removing an expansion card

Ê If applicable, disconnect internal cables from the expansion card.
RX2540 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
82.
Hardware: 5 minutes
81.
181