Removing The Slot Cover From The Riser Card Holder; Installing A Riser Card; Installing A Gpgpu Card In A Riser Module; Installing The Dummy Cover To Riser Module 2 (Fl) - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

9.6.3.2

Removing the slot cover from the riser card holder

Ê Remove the slot cover from the riser card holder as described in section
"Removing the slot cover from the riser card holder" on page
9.6.3.3

Installing a riser card

Ê Install the riser card as described in section
page 212.
9.6.3.4

Installing a GPGPU card in a riser module

Ê Install the GPGPU card in the riser module as described in section
a GPGPU card in a riser module (FL)" on page
9.6.3.5

Installing the dummy cover to riser module 2 (FL)

Figure 128: Installing the dummy cover to riser module 2
Ê Insert the dummy cover.
I
Make sure that the bracket of the riser card holder is positioned
outside the filler (see closeup).
Ê Fasten the dummy cover with two screws (see circles).
RX2540 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing a riser card (FL)" on
213.
211.
"Installing
225