Removing The Rear Cover (Riser Module 2) - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.3.5

Removing the rear cover (riser module 2)

Figure 104: Removing the rear cover
Ê Remove three screw (see circles).
Ê Remove the rear cover.
V
CAUTION!
Keep the rear cover for further use.
Always replace rear covers into unused installation locations to
comply with applicable EMC regulations and satisfy cooling
requirements.
198 Upgrade and Maintenance Manual
RX2540 M1