Installing The New 12X 3.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

Figure 77: Removing the 12x 3.5-inch HDD backplane
Ê Remove the four screws (see circles).
I
For the first time remove also three screws on the lower edge of the
HDD backplane. These screws are only used as a transportation
lock.
Ê Take out the HDD backplane at a slight angle (45°).

7.3.10.4 Installing the new 12x 3.5-inch HDD backplane

Figure 78: Installing the 12x 3.5-inch HDD backplane (A)
Ê Position the HDD backplane behind the four stampings into the chassis (see
circles).
RX2540 M4
Hard disk drives (HDD) and solid state drives (SSD)
Upgrade and Maintenance Manual 167