Wlan Interface Station Monitor Screen; Figure 138 Network > Interface > Wlan > Mac Filter > Add; Figure 139 Network > Interface > Wlan > Station Monitor; Table 64 Network > Interface > Wlan > Mac Filter - ZyXEL Communications ZyWALL USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 300:

Table of Contents

Chapter 10 Interface

Figure 138 Network > Interface > WLAN > MAC Filter > Add

The following table describes the labels in this menu.

Table 64 Network > Interface > WLAN > MAC Filter

10.11 WLAN Interface Station Monitor Screen

The station monitor displays the connection status of the wireless clients connected to (or

trying to connect to) a IEEE 802.11b/g card installed in the ZyWALL. To open the station

monitor, click Network > Interface > WLAN > Station Monitor. The screen appears as

Figure 139 Network > Interface > WLAN > Station Monitor

The following table describes the labels in this menu.

Table 65 Network > Interface > WLAN > Station Monitor

Enter the MAC address (in XX:XX:XX:XX:XX:XX format) of the wireless station that is to

be allowed or denied access to the ZyWALL.

Enter a descriptive name for the MAC address entry.

Click OK to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving.

Select the card slot where the IEEE 802.11b/g card is connected.

Click this button to update the information in the screen.

This is the index number of the MAC address.

This displays the MAC address (in XX:XX:XX:XX:XX:XX format) of a connected

wireless station.

This displays the strength of the wireless client's radio signal. The signal strength mainly

depends on the antenna output power and the wireless client's distance from the

ZyWALL USG 300 User's Guide