Figure 520 Maintenance > Report > Idp: Signature Name; Table 264 Maintenance > Report > Idp - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 48 Reports
Figure 520 Maintenance > Report > IDP: Signature Name
The following table describes the labels in this screen.
Table 264 Maintenance > Report > IDP
LABEL
Collect
Statistics
Apply
Reset
Refresh
Flush Data
Total Sessions
Scanned
Total Packet
Dropped
Total Packet
Reset
Top Entry By
#
Signature Name This column displays when you display the entries by Signature Name. The
Type
Severity
724
DESCRIPTION
Select this check box to have the ZyWALL collect IDP statistics.
The collection starting time displays after you click Apply. All of the statistics in this
screen are for the time period starting at the time displayed here. The format is year,
month, day and hour, minute, second. All of the statistics are erased if you restart
the ZyWALL or click Flush Data. Collecting starts over and a new collection start
time displays.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Click this button to update the report display.
Click this button to discard all of the screen's statistics and update the report display.
This field displays the number of sessions that the ZyWALL has checked for
intrusion characteristics.
The ZyWALL can detect and drop malicious packets from network traffic. This field
displays the number of packets that the ZyWALL has dropped.
The ZyWALL can detect and drop malicious packets from network traffic. This field
displays the number of packets that the ZyWALL has reset.
Use this field to have the following (read-only) table display the top IDP entries by
Signature Name, Source or Destination.
Select Signature Name to list the most common signatures that the ZyWALL has
detected.
Select Source to list the source IP addresses from which the ZyWALL has detected
the most intrusion attempts.
Select Destination to list the most common destination IP addresses for intrusion
attempts that the ZyWALL has detected.
This field displays the entry's rank in the list of the top entries.
signature name identifies a specific intrusion pattern. Click the hyperlink for more
detailed information on the intrusion.
This column displays when you display the entries by Signature Name. It shows the
categories of intrusions. See
This column displays when you display the entries by Signature Name. It shows the
level of threat that the intrusions may pose. See
information.
Table 157 on page 473 for more information.
Table 156 on page 472
ZyWALL USG 300 User's Guide
for more