Reports; Chapter 48 Reports; Overview; What You Can Do In The Report Screens - ZyXEL Communications ZyWALL USG 300 User Manual

C
H A P T E R

48.1 Overview

This chapter provides information about the report screens. Use the Report screens to start or
stop data collection and view various statistics about traffic passing through your ZyWALL.
Data collection may decrease the ZyWALL's traffic throughput rate.

48.1.1 What You Can Do in the Report Screens

• Use the Traffic Statistics screen (see
collection and view statistics.
• Use the Session screen (see
• Use the Anti-Virus screen (see
and view virus statistics.
• Use the IDP screen
IDP statistics.
• Use the Content Filter screen
and view content filter statistics.
• Use the Anti-Spam screen
view spam statistics.
• Use the Email Daily Report screen
how to send daily reports and what reports to send.

48.2 The Traffic Statistics Screen

Click Maintenance > Report > Traffic Statistics to display the Traffic Statistics screen.
This screen provides basic information about the following for example:
• Most-visited Web sites and the number of times each one was visited. This count may not
be accurate in some cases because the ZyWALL counts HTTP GET packets. Please see
Table 260 on page 718
• Most-used protocols or service ports and the amount of traffic on each one
• LAN IP with heaviest traffic and how much traffic has been sent to and from each one
ZyWALL USG 300 User's Guide
Section 48.2 on page
Section 48.3 on page
Section 48.4 on page
(Section 48.5 on page 723) to start or stop data collection and view
(Section 48.6 on page
(Section 48.7 on page
(Section 48.8 on page
for more information.
48

Reports

717) to start or stop data
720) to view sessions by user or service.
722) to start or stop data collection
725) to start or stop data collection
727) to start or stop data collection and
729) to configure where and
717