Figure 24 Pptp Encapsulation: Auto; Table 11 Pptp Encapsulation: Auto - ZyXEL Communications ZyWALL USG 300 User Manual

Figure 24 PPTP Encapsulation: Auto

The following table describes the labels in this screen.

Table 11 PPTP Encapsulation: Auto

LABEL
ISP Parameters
Encapsulation
User Name
Password
Retype to Confirm
Nailed-Up
Idle Timeout
PPTP
Configuration
Base Interface
Base IP Address
IP Subnet Mask
Server IP
ZyWALL USG 300 User's Guide
DESCRIPTION
This displays the type of Internet connection you are configuring.
Type the user name given to you by your ISP. You can use alphanumeric and -
_ @$./ characters, and it can be up to 31 characters long.
Type the password associated with the user name above. Use up to 64 ASCII
characters except the [] and ?. This field can be blank.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically
disconnects from the PPTP server.
This displays the identity of the Ethernet interface you configure to connect with a
modem or router.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Type the IP address of the PPTP server.
Chapter 4 Wizard Setup
85