Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 16 Configuration > WAN > Dynamic DNS
LABEL
Dynamic DNS Setup
Dynamic DNS
Service Provider
Host Name
Username
Password
Apply
Cancel
6.7 Interface Group Screen
You can manually add a LAN and/or WLAN interface to a new group. Click Configuration > WAN >
Interface Group to open the following screen.
Figure 22 Configuration > WAN > Interface Group
The following table describes the fields in this screen.
Table 17 Configuration > WAN > Interface Group
LABEL
Add
Interface Grouping Rules
#
Name
WAN Interface
LAN Interfaces
Delete
6.7.1 Add Interface Group
Click the Add button in the Interface Group screen to open the following screen. Use this screen to
create a new interface group.
Chapter 6 WAN
DESCRIPTION
Select Enable to use dynamic DNS. Select Disable to turn this feature off.
Select the name of your Dynamic DNS service provider.
Enter a host names in the field provided.
Enter your user name.
Enter the password assigned to you.
Click Apply to save your changes back to the EMG2881-T20A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Click this to add a new interface grouping rule.
You must configure a WAN connection before you can add a new interface
grouping rule. See
Chapter 6 on page 37
This is the rule index number (read-only).
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN and/or WLAN interfaces in the group.
Click the Delete icon to remove the group.
EMG2881-T20A User's Guide
51
for more information.
Advertisement
Table of Contents
