The Service Group Summary Screen; Figure 422 Object > Service > Service Group; Table 206 Object > Service > Service Group - ZyXEL Communications ZyWALL USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 300:

Table of Contents

Chapter 38 Services

Table 205 Object > Service > Service > Edit (continued)

38.3 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In addition,

this screen allows you to add, edit, and remove service groups.

To access this screen, log in to the Web Configurator, and click Object > Service > Service

Figure 422 Object > Service > Service Group

The following table describes the labels in this screen. See

more information as well.

Table 206 Object > Service > Service Group

This field appears if the IP Protocol is ICMP Type.

Select the ICMP message used by this service. This field displays the message

text, not the message number.

This field appears if the IP Protocol is User Defined.

Enter the number of the next-level protocol (IP protocol). Allowed values are 0 -

Click OK to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving your changes.

This field is a sequential value, and it is not associated with a specific service

This field displays the name of each service group.

This field displays the description of each service group, if any.

This column provides icons to add, edit, and remove service groups.

To add a service group, click the Add icon at the top of the column. The Service

Group Add/Edit screen appears.

To edit a service group, click the Edit icon next to the service group. The Service

Group Add/Edit screen appears.

To delete a service group, click on the Remove icon next to the service group. The

Web Configurator confirms that you want to delete the service group.

Section 38.3.1 on page 599

ZyWALL USG 300 User's Guide