Table 280 Adp Logs; Table 281 Anti-Virus Logs - ZyXEL Communications ZyWALL USG 300 User Manual

Appendix A Log Descriptions

Table 280 ADP Logs

LOG MESSAGE
from <zone> to <zone>
[type=<type>] <message>
, Action: <action>,
Severity: <severity>
Enable ADP succeeded.
Disable ADP succeeded.
ADP rule <num> has been
deleted.
ADP rule <num> has been
moved to <num>.
New ADP rule has been
appended.
ADP rule <num> has been
inserted.
ADP rule <num> has been
modified.
ADP profile <name> has
been deleted.
ADP profile <name> has
been changed to <name>.
ADP profile <name> has
been created.
ADP profile <name> has
been modified.
Packet payload length
is over the maximum
system handle length
LAND attack packet.
Source IP is the same
as Destination IP.

Table 281 Anti-Virus Logs

LOG MESSAGE
Initializing Anti-Virus
signature reference
table has failed.
Reloading Anti-Virus
signature database has
failed.
756
DESCRIPTION
The ZyWALL detected an anomaly in traffic traveling between the
specified zones.
The <type> = {scan-detection(<attack>) | flood-detection(<attack>) |
http-inspection(<attack>) | tcp-decoder(<attack>)}.
The <message> gives details about the attack, although the message
is dropped if the log is more than 128 characters.
The <action> is what the ZyWALL did with the packet.
The <severity> is the threat level (very low, low, medium, high, or
severe).
ADP was turned on.
ADP was turned off.
The specified ADP rule has been deleted.
The ADP rule with the specified index number (first num) was moved
to the specified index number (second num).
An ADP rule has been added to the end of the list.
An ADP rule has been inserted. <num> is the number of the new rule.
The ADP rule of the specified number has been changed.
The ADP rule with the specified name has been removed.
An ADP rule's name has been changed from first <name> to the
second <name>.
An ADP profile with the specified name has been added.
The ADP rule with the specified name has been changed.
The ZyWALL's ADP feature detected a packet with a length over
16000 bytes.
The ZyWALL's ADP feature detected traffic with the same IP address
set as both the source and the destination.
DESCRIPTION
The ZyWALL failed to initialize the anti-virus signatures due to an
internal error.
The ZyWALL failed to reload the anti-virus signatures due to an
internal error.
ZyWALL USG 300 User's Guide