Table 299 Wlan Logs - ZyXEL Communications ZyWALL USG 300 User Manual

Appendix A Log Descriptions
Table 298 Interface Logs (continued)
LOG MESSAGE
"Cellular device [%s
%s] has been removed
from %s.
Interface cellular%d
required
authentication
password.Please set
password in cellular%d
edit page.

Table 299 WLAN Logs

LOG MESSAGE
Wlan %s is enabled.
Wlan %s is disabled.
Wlan %s has been
configured.
Interface %s has been
configured.
Interface %s has been
deleted.
Create interface %s
has failed. Wlan
device does not exist.
System internal error.
No 802.1X or WPA
enabled!
System internal error.
Error configuring WPA
state!
System internal error.
Error enabling WPA/
802.1X!
Station has
associated. Interface:
%s, MAC: %s.
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
Station association
has failed. Maximum
associations have
reached the maximum
number. Interface: %s,
MAC: %s.
798
DESCRIPTION
The cellular device (identified by its manufacturer and model) has been
removed from the specified slot.
You need to manually enter the password for the listed cellular
interface (%d).
DESCRIPTION
The WLAN (IEEE 802.11 b and or g) feature has been turned on. %s
is the slot number where the WLAN card is or can be installed.
The WLAN (IEEE 802.11 b and or g) feature has been turned off. %s
is the slot number where the WLAN card is or can be installed.
The WLAN (IEEE 802.11 b and or g) feature's configuration has been
changed. %s is the slot number where the WLAN card is or can be
installed.
The configuration of the specified WLAN interface (%s) has been
changed.
The specified WLAN interface (%s) has been removed.
The wireless device failed to create the specified WLAN interface
(%s). Remove the wireless device and reinstall it.
IEEE 802.1x or WPA is not enabled.
The ZyWALL was not able to configure the wireless device to use
WPA. Remove the wireless device and reinstall it.
The ZyWALL was not able to enable WPA/IEEE 802.1X.
A wireless client with the specified MAC address (second %s)
associated with the specified WLAN interface (first %s).
There was an EAP timeout for a wireless client connected to the
specified WLAN interface (first %s). The MAC address of the wireless
client is listed (second %s).
A wireless client with the specified MAC address (second %s) failed to
connect to the specified WLAN interface (first %s) because the WLAN
interface already has its maximum number of wireless clients.
ZyWALL USG 300 User's Guide