Figure 121 Network > Interface > Port Grouping
Each section in this screen is described below.
Table 47 Network > Interface > Port Grouping
LABEL
Representative
Interface (ge1, ge2,
ge3, ge4, ge5, ge6,
ge7)
Physical Port (1, 2,
3, 4, 5, 6, 7)
Apply
Reset
10.4 Ethernet Summary Screen
This screen lists every Ethernet interface and virtual interface created on top of Ethernet
interfaces. To access this screen, click Network > Interface.
ZyWALL USG 300 User's Guide
DESCRIPTION
These are Ethernet interfaces. To add a physical port to a representative
interface, drag the physical port onto the corresponding representative
interface.
These are the physical ports as they appear on the front panel of the ZyWALL.
To add a physical port to a representative interface, drag the physical port onto
the corresponding representative interface.
Click this button to save your changes and apply them to the ZyWALL.
Click this button to change the port groups to their current configuration (last-
saved values).
Chapter 10 Interface
187