Table 91 Network > Zone > Edit - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 14 Zones
The following table describes the labels in this screen.
Table 91 Network > Zone > Edit
LABEL
Name
Block Intra-zone
Traffic
Member List
276
DESCRIPTION
Type the name used to refer to the zone. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a
_
number. This value is case-sensitive.
Select this check box to block network traffic between members in the zone.
Available lists the interfaces that do not belong to any zone. The word in front of
the name indicates whether this member is an interface or a VPN tunnel.
INTERFACE - this member is an interface.
IPSEC - this member is a VPN tunnel.
Select any interfaces that you want to add to the zone you are editing, and click the
right arrow button to add them.
Member lists the interfaces that belong to the zone. Select any interfaces that you
want to remove from the zone, and click the left arrow button to remove them.
ZyWALL USG 300 User's Guide