Status; Chapter 7 Status; Overview; What You Can Do In The Status Screens - ZyXEL Communications ZyWALL USG 300 User Manual

C
H A P T E R

7.1 Overview

Use the Status screens to check status information about the ZyWALL.

7.1.1 What You Can Do in the Status Screens

Use the Status screens for the following.
• Use the main Status screen (see
device information, system status, system resource usage, licensed service status, and
interface status. You can also go to the other status screens for more information.
• Use the VPN status screen (see
are currently established.
• Use the DHCP Table screen (see
currently assigned to DHCP clients and the IP addresses reserved for specific MAC
addresses.
• Use the Port Statistics screen (see
for each physical port. To access this screen, click Port Statistics in the Status screen.
• Use the Port Statistics Graph screen (see
graph of packet statistics for each physical port.
• Use the Current Users screen (see
currently logged into the ZyWALL.

7.2 The Status Screen

The Status screen displays when you log into the ZyWALL or click Status. Use this screen to
look at the ZyWALL's general device information, system status, system resource usage,
licensed service status, and interface status.
ZyWALL USG 300 User's Guide
Section 7.2 on page 151) to see the ZyWALL's general
Section 7.2.4 on page 158) to look at the VPN tunnels that
Section 7.2.5 on page 159) to look at the IP addresses
Section 7.2.6 on page 160) to look at packet statistics
Section 7.2.6 on page
Section 7.2.8 on page 163) to look at a list of the users
7

Status

160) to look at a line
151