Table 302 Force Authentication Logs; Table 303 File Manager Logs; Table 304 Dhcp Logs - ZyXEL Communications ZyWALL USG 300 User Manual

Appendix A Log Descriptions

Table 302 Force Authentication Logs

LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!

Table 303 File Manager Logs

LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
ERROR:#%s, %s
WARNING:#%s, %s
Resetting system...
System resetted. Now
apply %s..
Running %s...

Table 304 DHCP Logs

LOG MESSAGE
Can't find any lease for this
client - %s, DHCP pool full!
DHCP server offered %s to
%s(%s)
800
DESCRIPTION
Force user authentication will be turned on because HTTP server was
turned on.
Force user authentication will be turned off because HTTP server was
turned off.
DESCRIPTION
Apply configuration failed, this log will be what CLI command is and
what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command is and
what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what
error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what
warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Before apply configuration file.
After the system reset, it started to apply the configuration file.
%s is configuration file name.
An administrator ran the listed shell script.
%s is script file name.
DESCRIPTION
All of the IP addresses in the DHCP pool are already assigned to
DHCP clients, so there is no IP address to give to the listed DHCP
client.
The DHCP server feature gave the listed IP address to the computer
with the listed hostname and MAC address.
ZyWALL USG 300 User's Guide