Figure 500 Maintenance > File Manager > Configuration File - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 46 File Manager
Once your ZyWALL is configured and functioning properly, it is highly recommended that
you back up your configuration file before making further configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Configuration File Flow at Restart
• If there is not a startup-config.conf when you restart the ZyWALL (whether through a
management interface or by physically turning the power off and back on), the ZyWALL
uses the system-default.conf configuration file with the ZyWALL's default settings.
• If there is a startup-config.conf, the ZyWALL checks it for errors and applies it. If there
are no errors, the ZyWALL uses it and copies it to the lastgood.conf configuration file as
a back up file. If there is an error, the ZyWALL generates a log and copies the startup-
config.conf configuration file to the startup-config-bad.conf configuration file and tries
the existing lastgood.conf configuration file. If there isn't a lastgood.conf configuration
file or it also has an error, the ZyWALL applies the system-default.conf configuration
file.
• You can change the way the startup-config.conf file is applied. Include the
startup stop-on-error off
startup-config.conf file and applies all of the valid commands. The ZyWALL still
generates a log for any errors.
Figure 500 Maintenance > File Manager > Configuration File
Do not turn off the ZyWALL while configuration file upload is in progress.
698
command. The ZyWALL ignores any errors in the
ZyWALL USG 300 User's Guide
setenv-