Figure 309 Start New Connection Wizard; Figure 310 New Connection Wizard: Network Connection Type - ZyXEL Communications ZyWALL USG 300 User Manual

27.6.2.3 Configure the Windows 2000 Network Connection
After you have configured the IPSec policy, use these directions to create a network
connection.
1 Click Start > Settings > Network and Dial-up connections > Make New Connection.
In the wizard welcome screen, click Next.

Figure 309 Start New Connection Wizard

2 Select Connect to a private network through the Internet and click Next.

Figure 310 New Connection Wizard: Network Connection Type

3 Enter the domain name or WAN IP address configured as the My Address in the VPN
gateway configuration that the ZyWALL is using for L2TP VPN. Click Next.
ZyWALL USG 300 User's Guide
Chapter 27 L2TP VPN Example
415