ZyXEL Communications ZyWALL USG 300 User Manual page 786

Appendix A Log Descriptions
Table 294 Device HA Logs (continued)
LOG MESSAGE
%s file not existed,
Skip syncing it for %s
Master firmware
version can not be
recognized. Stop
syncing from Master.
Device HA Sync has
failed when syncing %s
for %s due to bad
\"Sync Password\".
Device HA Sync has
failed when syncing %s
for %s due to bad
\"Sync From\" or
\"Sync Port\".
Device HA Sync has
failed when syncing %s
for %s.
Sync Failed: Cannot
connect to Master when
syncing %s for %s.
Backup firmware
version can not be
recognized. Stop
syncing from Master.
Sync failed: Remote
Firmware Version
Unknown
Master firmware
version should be the
same with Backup.
Update %s for %s has
failed.
Update %s for %s has
failed: %s.
Device HA has skipped
syncing %s since %s is
%s.
Device HA
authentication type
for VRRP group %s
maybe wrong.
786
DESCRIPTION
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact, there
should be something in the Master for the device to synchronize with,
1st %s: The syncing object, 2ed %s: The feature name for the syncing
object.
Synchronizing stopped because the firmware version file was not
found in the Master. A Backup device only synchronizes from the
Master if the firmware versions are the same between the Master and
the Backup.
The synchronization password was incorrect when attempting to
synchronize a certain object (AV/AS/IDP/Certificate/System
Configuration).
1st %s: The object to be synchronized, 2ed %s: The feature name for
the object to be synchronized.
The Sync From IP address or Sync Port may be incorrect when
synchronizing a certain object (AV/AS/IDP/Certificate/System
Configuration).
Synchronization failed when synchronizing a certain object (AV/AS/
IDP/Certificate/System Configuration) due to an unknown reason, 1st
%s: The object to be synchronized, 2ed %s: The feature name for the
object to be synchronized.
Synchronization failed because the Backup could not connect to the
Master. The object to be synchronized, 2ed %s: The feature name for
the object to be synchronized.
The firmware version on the Backup cannot be resolved to check if it is
the same as on the Master. A Backup device only synchronizes from
the Master if the Master and the Backup have the same firmware
versions.
The firmware version on the Master cannot be resolved to check if it is
the same as on the Master. A Backup device only synchronizes from
the Master if the Master and the Backup have the same firmware
versions.
The Backup and Master have different firmware versions. A Backup
device only synchronizes from the Master if the Master and the Backup
have the same firmware versions.
Updating a certain object failed when updating (AS/AV/IDP/Certificate/
System Configuration). 1st %s: The object to be synchronized, 2ed
%s: The feature name for the object to be synchronized.
Updating a certain object failed when updating (AS/AV/IDP/Certificate/
System Configuration) due to some reason. 1st %s: The object to be
synchronized, 2ed %s: The feature name for the object to be
synchronized.
A certain service has no license or the license is expired, so it was not
synchronized from the Master. 1st %s: The object to be synchronized,
2ed %s: The feature name for the object to be synchronized, 3rd %s:
unlicensed or license expired.
A VRRP group's Authentication Type (Md5 or IPSec AH) configuration
may not match between the Backup and the Master. %s: The name of
the VRRP group.
ZyWALL USG 300 User's Guide