Table 300 Account Logs; Table 301 Port Grouping Logs - ZyXEL Communications ZyWALL USG 300 User Manual

Table 299 WLAN Logs (continued)
LOG MESSAGE
WPA authentication has
failed. Interface: %s,
MAC: %s.
Incorrect password for
WPA or WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
Incorrect username or
password for WPA or
WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
System internal error.
%s: STA %s could not
extract EAP-Message
from RADIUS message

Table 300 Account Logs

LOG MESSAGE
Account %s %s has been
deleted.
Account %s %s has been
changed.
Account %s %s has been
added.

Table 301 Port Grouping Logs

LOG MESSAGE
Interface %s links up
because of changing
Port Group. Enable
DHCP client.
Interface %s links
down because of
changing Port Group.
Disable DHCP client.
Port Group on %s is
changed. Renew DHCP
client.
Port Grouping %s has
been changed.
ZyWALL USG 300 User's Guide
DESCRIPTION
A wireless client used an incorrect WPA key and thus failed to connect
to the specified WLAN interface (first %s). The MAC address of the
wireless client is listed (second %s).
A wireless client used an incorrect WPA or WPA2 user password and
failed authentication by the ZyWALL's local user database while trying
to connect to the specified WLAN interface (first %s). The MAC
address of the wireless client is listed (second %s).
A wireless client used an incorrect WPA or WPA2 user name or user
password and failed authentication by the ZyWALL's local user
database while trying to connect to the specified WLAN interface (first
%s). The MAC address of the wireless client is listed (second %s).
There was an error when attempting to extract the EAP-Message from
a RADIUS message. The first %s is the WLAN interface. The second
%s is the MAC address of the wireless client.
DESCRIPTION
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
A user changed an ISP account profile's options.
1st %s: profile type, 2nd %s: profile name.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
DESCRIPTION
An administrator used port-grouping to assign a port to a
representative Interface and this representative interface is set to
DHCP client and only has one member. In this case the DHCP client
will be enabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is set to
DHCP client and has no members in its group. In this case the DHCP
client will be disabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is set to
DHCP client and has more than one member in its group. In this case
the DHCP client will renew. %s: interface name.
An administrator configured port-grouping, %s: interface name.
Appendix A Log Descriptions
799