Wlan Interface General Screen - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 11 Interfaces
Table 57 Configuration > Network > Interface > Cellular > Add (continued)
LABEL
Actions when over
% of time budget
or % of data
budget
OK
Cancel

11.6 WLAN Interface General Screen

This feature is available for USG 20W only.
The following figure provides an example of a wireless network. The wireless
network is in the blue circle. Wireless clients (A and B) connect to an access point
(AP) to access other devices (such as the printer) or the Internet. Your ZyWALL
works as an AP when you install a compatible WLAN card.
Figure 167 Example of a Wireless Network
248
DESCRIPTION
Specify the actions the ZyWALL takes when the specified percentage
of time budget or data limit is exceeded. Enter a number from 1 to 99
in the percentage fields. If you change the value after you configure
and enable budget control, the ZyWALL resets the statistics.
Select None to not create a log when the ZyWALL takes this action,
Log to create a log, or Log-alert to create an alert log. If you select
Log or Log-alert you can also select recurring every to have the
ZyWALL send a log or alert for this event periodically. Specify how
often (from 1 to 65535 minutes) to send the log or alert.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
ZyWALL USG 20/20W User's Guide