Figure 515 Maintenance > Report > Traffic Statistics; Table 260 Maintenance > Report > Traffic Statistics - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 48 Reports
You use the Traffic Statistics screen to tell the ZyWALL when to start and when to stop
collecting information for these reports. You cannot schedule data collection; you have to start
and stop it manually in the Traffic Statistics screen.
Figure 515 Maintenance > Report > Traffic Statistics
There is a limit on the number of records shown in the report. Please see
719 for more information. The following table describes the labels in this screen.
Table 260 Maintenance > Report > Traffic Statistics
LABEL
Data Collection
Collect Statistics
Apply
Reset
Statistics
Interface
Traffic Type
Refresh
Flush Data
#
IP Address/User
Direction
718
DESCRIPTION
Select this to have the ZyWALL collect data for the report. If the ZyWALL has
already been collecting data, the collection period displays to the right. The
progress is not tracked here real-time, but you can click the Refresh button to
update it.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Select the interface from which to collect information. You can collect information
from Ethernet, VLAN, bridge, PPPoE/PPTP, and auxiliary interfaces.
Select the type of report to display. Choices are:
Host IP Address/User - displays the IP addresses or users with the most traffic
and how much traffic has been sent to and from each one.
Service/Port - displays the most-used protocols or service ports and the amount of
traffic for each one.
Web Site Hits - displays the most-visited Web sites and how many times each one
has been visited.
Each type of report has different information in the report (below).
Click this button to update the report display.
Click this button to discard all of the screen's statistics and update the report
display.
These fields are available when the Traffic Type is Host IP Address/User.
This field is the rank of each record. The IP addresses and users are sorted by the
amount of traffic.
This field displays the IP address or user in this record. The maximum number of IP
addresses or users in this report is indicated in
This field indicates whether the IP address or user is sending or receiving traffic.
Ingress- traffic is coming from the IP address or user to the ZyWALL.
Egress - traffic is going from the ZyWALL to the IP address or user.
Table 261 on page
Table 261 on page 719.
ZyWALL USG 300 User's Guide