When Memory Is Full
Message
"Memory is full. [Print]
scanned orig., [Clear] to
cancel/clear memory."
[Clear] [Print]
• Copying will stop and
this message will be
displayed when the
memory is full.
"Memory is full. Cannot
scan."
"Reset * orig., then press
[Resume] to scan and copy
the remaining originals."
[Stop] [Resume]
Causes
The scanned original
exceeds the number of
pages that can be stored in
memory.
Memory reached capacity.
The machine checks if the
remaining originals should
be copied, after the
scanned original has been
printed.
If You Cannot Make Copies As You Want
Solutions
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Clear] to cancel the scanning data and
not copy.
Reduce the number of originals, and
then try print or copy again.
To continue copying, remove all copies,
and then press [Resume]. To stop
copying, press [Stop].
101