When Memory Is Full - Ricoh All in One Printer Operating Instructions Manual

Troubleshooting When Using the Copy Function

When Memory is Full

This section explains likely causes of and possible solutions for problems related
to full memory.
Message
Memory is full.
2
[Print] scanned
orig., [Clear]
to cancel/clear
memory.
Press [Resume]
to scan and copy
remaining origi-
nals.
20
Cause
The scanned originals exceeds
the number of pages that can be
stored in memory.
The machine checked if the re-
maining originals should be cop-
ied, after the scanned original has
been printed.
Solution
Press [Print] to copy scanned orig-
inals and cancel the scanning da-
ta. Press [Clear] to cancel the
scanning data and not copy.
To continue copying, remove all
copies, and then press [Resume].
To stop copying, press [Stop].