11G Cts To Self; 11G Slot Time - Ricoh D093 Service Manual

WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
[00 to 11/00/1]
Note: There are four settings (binary numbers): 00, 01, 10, 11. These settings
11
are possible only after the wireless LAN card has been installed.
00: 1st key. If the initiator receives another login request while logging in, the
request is refused.
01, 10, 11: 2nd, 3rd, 4th keys are "Reserved".
42 Fragment Thresh
Adjusts the fragment threshold for the IEEE802.11 card.
[256 to 2346 / 2346 / 1]
This SP is displayed only when the IEEE802.11 card is installed.

43 11g CTS to Self

Determines whether the CTS self function is turned on or off.
[0 to 1 / 1 / 1] 0: Off, 1: On
This SP is displayed only when the IEEE802.11 card is installed.

44 11g Slot Time

Selects the slot time for IEEE802.11.
[0 to 1 / 0 / 1] 0: 20
This SP is displayed only when the IEEE802.11 card is installed.
45 WPA Debug Lvl
Selects the debug level for WPA authentication application.
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11 card is installed.
SM Appendix
m, 1: 9 m
2-161
SP5-xxx Mode
D093/D094