Target Temp: Press. Roller - Ricoh D093 Service Manual

Main SP Modes
1932

Target Temp: Press. Roller

Sets the target fusing temperature of the pressure roller for plain paper,
translucent paper, and film. These temperatures are used for pressure roller
feedback. Turn the machine power off/on after changing the settings.
Important:
Modes "1" to "5" below refer to the paper type and thickness settings
selected in User Tools (see "Paper Thickness Default Selection" in this
section).
After adjusting these SP's, you must turn the machine power off/on.
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1
7 Trans.: Mode2
8 Trans.: Mode3
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
16 Plain: Low Temp Mode
D093/D094
o
[60 to 180 /100/5 C]
o
[60 to 180 /85/5 C]
o
[60 to 180 /60/5 C]
o
[60 to 180 /130/5 C]
o
[60 to 180 /100/5 C]
o
[60 to 180 /60/5 C]
o
[60 to 180 /120/5 C]
6-10 SM