Ricoh D093 Service Manual page 162

Installation of MFP Options
7. Use a clean cloth moistened with alcohol to clean where the 7 clamps will be attached.
8. Attach clamps [1] to the left side of the main machine (
9. Use one tape to attach the antenna with the black ferrite core at [2].
10. Use one tape to attach the antenna with the white ferrite core at [3].
Make sure that Antenna1 [2] with the black ferrite core is high and that Antenna 2
[3] with the white ferrite core is low as shown above.
Antenna 2 receives and Antenna 1 transmits as well as receives so it must always
be placed higher for signal transmission.
11. Route the cables through the clamps as shown and close the clamps.
12. Reconnect the machine to the power source and turn the main power switch on.
13. Print a Configuration Page to confirm correct installation:
User Tools> Printer Features> List/Test Print> Configuration Page
14. Do SP5840-001 (WEP Key Select).
D093/D094
x7).
3-84 SM