Ricoh D093 Service Manual page 104

Main Machine Installation (D093/D094)
4. Attach upper output stacker (R) [1].
5. Attach upper output stacker (L) [2].
6. Attach the guide lever [2].
This guide lever should be up or down, depending on whether "Upper" or "Lower" is
selected for "Copy Output" on the operation panel:
The guide lever should be up for "Upper" output.
The guide lever should be down for "Lower" output so the original can pass over it.
7. Attach the upper output guide hinges [4].
8. Attach the upper output guide [5].
9. Attach the original output guides [6]
10. Attach the emblem [1] and panel [2] to the toner hopper cover [3].
Push the panel in until the emblem and panel move into their positions with an
audible click.
D093/D094
, , , .
3-26 SM