Ricoh D093 Service Manual page 63

NUMBER
Motors
M1 Cassette Feed Motor
M2 Cooling Fan Motor
M3 Cutter Motor
M4 Drum Motor
M5 Fusing Motor
M6 Main Motor
PCB Cooling Fan
M7
Motor 1
PCB Cooling Fan
M8
Motor 2
M9 Roll Feed Motor
M10 Scanner Motor
Used Toner Bottle
M11
Motor
M12 Wire Cleaner Motor
SM
NAME
This stepper motor controls the paper feed
roller in the paper cassette.
This is an exhaust fan for the area around the
drum.
This controls the cutter in the roll feeder.
This controls the OPC drum.
This controls the hot roller, fusing exit rollers,
and upper exit rollers.
This controls the registration roller,
development unit, and the agitator in the toner
cartridge.
Cools the SIPU, MCU and controller board.
Cools the SIPU, MCU and controller board.
This controls the feed rollers for roll 1 and roll
2 in the roll feeder.
This controls the original feed rollers and
original exit rollers.
This controls the mechanism that keeps the
level of used toner in the bottle flat.
This moves the corona wire cleaner to the left
and right to clean the charge corona wire.
2-21
DESCRIPTION
Overview
D093/D094