Ricoh D093 Service Manual page 252

Fusing
2. Disconnect:
[A] Fusing lamps (
[B] Pressure roller thermistor
Exit unit set switch
[C] Fusing exit sensor (
[D] Pressure roller thermistor (
3. Open clamps [E] (
4. Release the arms of the fusing unit [A] on both sides.
The fusing unit is very heavy. Pull it out slowly.
5. Remove the fusing unit [B] (
D093/D094
x2)
( x1,
( x1)
x1)
x1)
x2).
x1, x2)
5-70
x1)
SM