Service Call Conditions - Ricoh D093 Service Manual

7.2 SERVICE CALL CONDITIONS

There are 4 levels of service call conditions
Level
Fusing unit SC codes shown on the operation
A panel. The machine is disabled. The operator
cannot reset the machine.
These SC codes disable only the features that
use the defective item. The user does not see
B these SC codes in usual conditions. But, they
are shown on the operation panel when the
defective feature is used.
SC codes that are not shown on the operation
C
panel. They are recorded internally.
These SC codes are shown on the operation
panel. To reset these SC codes, turn the
operation switch or main power switch off and
D
on. These SC codes are shown again if the
error occurs again.
SM
Definition
7-13
Service Call Conditions
Reset Procedure
The machine requires
immediate servicing by a
service technician.
Cycle the machine off/on with
the main power switch..
Recorded only.
Set the operation switch or the
main power switch to "off" then
to "on".
D093/D094