Main SP Modes
6 CIS1-2 Sub Scan
7 CIS2 Sub Scan
8 CIS2-3 Sub Scan
9 CIS3-4 Sub Scan
10 CIS4-5 Sub Scan
4973
Scan Correction
This SP turns on image adjustment feature that corrects slight misalignment of
the image at the joints of the CIS elements.
[0 to 2 / 2 / 1]
0: No adjustment
1: Simple adjustment at joints
2: Gradation adjustment at joint
4975
Prevent Original Falling
This SP determines whether the machine stops and holds the edge of the original
after the original is fed so that it does not fall.
[0 to 1/0/1]
*0: Disable, 1: Enable
D093/D094
[0 to 2815 / 620 / 1]
DFU
[0 to 2815 / 645 / 1]
[0 to 255 / 26 / 1]
[0 to 2815 / 643 / 1]
6-44
SM