Ricoh D093 Service Manual page 131

flanges of the cassette unit. Then, attach the cassette unit (
8. From the front, remove the board cover [1] (
9. Connect the paper-cassette-unit connectors [2] (
10. From the front, attach the harness clamps
11. Route the connector cable through the open clamps, then close the clamps (
12. Reattach the board cover, front cover, and rear plate of the roll feeder.
13. Reinstall the paper rolls, and close the drawer of the roll feeder.
14. Put the paper cassette in the paper cassette unit.
15. Set the Paper Size and Type for the Paper Cassette
Push [User Tools]> "System Settings"> "Tray Paper Settings"> "Tray Paper Size: Tray
3"
Select the paper size for the paper cassette> [OK].
Push "Next"> "Paper Type: Tray 3"
Select the paper type for the paper cassette.
SM
x 4).
x 2).
x 2) to the roll feeder.
, , , ,
3-53
Paper Cassette (B853)
x6).
D093/D094