Ricoh D093 Service Manual page 575

1 Initialize Developer
Touch [EXECUTE] to mix developer and initialize the ID sensor
2 Lot Number 1
This is the lot number of the 1st packet.
3 Lot Number 2
This is the lot number of the 2nd packet.
2803 Corona Wire Cleaning
Do this SP to clean the charge corona wire. This SP also moves the cleaning pad
to the home position. The cleaning requires about 20 sec. to complete.
2804 Corona Wire Cleaning Interval
Sets the interval for charge corona wire cleaning.
Note: The wire is cleaned only when the hot roller temperature is below 50 °C
o
(122 F).
[0 to 6/3/1 step]
0: None (no cleaning)
1: After the main switch is turned on.
2: After 300 m of copies
3: After 600 m of copies
4: After 900 m of copies
5: After 1200 m of copies
6: After 1500 m of copies
SM Appendix 2-53
SP2-xxx Drum
D093/D094