5.7.7 FUSING UNIT
Switch the main power switch off. Then disconnect the machine from its power source.
Let the fusing unit become cool for 10 minutes or more before you remove it.
Preparation
Rear cover, controller cover (
Remove the left and right side covers. (
Remove paper exit unit (
1.
Remove:
[A] Anti-condensation heater switch bracket (
[B] Left vertical ground plate (
[C] Right vertical ground plate (
SM
p.5-3 "Rear Cover, Controller Cover")
p.5-2 "Side Covers")
p.5-4 "Paper Exit Unit")
x2)
x2)
x2,
x1)
5-69
Fusing
D093/D094