Attach The Narrow Mylars To The Main Machine - Ricoh D093 Service Manual

Table (B854)
9. Clean the rear plate [1] of the table with alcohol.
10. Attach the harness clamp [2].
11. Clamp the power cord [3] to the table (

Attach the Narrow Mylars to the Main Machine

1. If the rear cover is attached to the main machine, remove it (
1. Use a clean cloth, moistened with a small amount of alcohol, to clean the area around the
rib .
2. Remove the tape from each end of one of the narrow mylars.
3. Attach one end to the top edge of the cover
D093/D094
x 1).
.
3-58
x 2).
SM