Paper Exit Selection - Ricoh D093 Service Manual

1.1.5 PAPER EXIT SELECTION

The previous model (B286/B289) has a selection lever [1] that can be raised and lowered to
select the exit path. A paper exit selection sensor [2] below the lever detects the position of the
lever and tells the machine whether the upper or lower path can be selected on the operation
panel, or whether output is restricted to the lower path.
The D093/D094 also has the lever, but no sensor. The paper exit selection switch [3] tells the
machine whether the upper or lower path can be selected on the operation panel. This
mechanism is described in a later section of this manual. (
Paths")
When the optional Rear Stacker (D312) is installed, the standard lower stacker cannot
be used.
SM
p.2-14 "Original/Copy Paper
1-5
Main Machine
D093/D094