Scanner Jams - Ricoh D093 Service Manual

Jam Code Tables, Cover Open
The operator must open and close the upper unit to release a jam in the fusing unit.
If the operator opens and closes the paper exit cover during copying, this is not recorded in
the jam record.
An original or paper feed jam that occurs just after the main power switch or operation
switch comes on is not recorded in the jam record.

7.4.2 SCANNER JAMS

In the tables below "late" and "lag" have the following meanings:
Late. Paper (or original) fails to arrive at the sensor location at the prescribed time.
Lag. Paper (or original) fails to leave the sensor location at the prescribed time.
LE. Leading edge of original or paper.
TE. Trailing edge of original or paper.
Scanner Standby Jams
Code
Initial jam: Original Set Sensor
Initial jam: Original Registration Sensor
Initial jam: Original Width Sensor (A0)
Initial jam: Original Width Sensor (A1)
Initial jam: Original Width Sensor (A2)
Initial jam: Original Width Sensor (A3)
001 Initial jam: Original Width Sensor (A4)
Initial jam: Original Width Sensor (B1)
Initial jam: Original Width Sensor (B2)
Initial jam: Original Width Sensor (B3)
Initial jam: Original Width Sensor (B4)
Initial jam: Original Width Sensor (914)
Initial jam: Original Exit Sensor
D093/D094
Location
7-52
Display Comment
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
SM