3.9.8 GIGABIT ETHERNET TYPE B (D377-21)
Accessories
Check the accessories and their quantities against the table below.
Description
1.
Gigabit Ethernet Board
2.
Ferrite Core
3.
Standard LAN Connector Cap
When the Gigabit Ethernet Board is installed, the standard Ethernet board can no
longer be used. A cap is provided to cover the standard Ethernet connector. This
prevents accidental reconnection of the cable while the Gigabit Ethernet board is
installed in the machine.
Touch a metal surface to discharge any static electricity from your hands before you
handle the board.
Installation
Before doing the procedure, turn off the main power switch and unplug the machine
from its power source.
1.
Remove the rear cover [1] of the main machine (
SM
Qt'y
1
1
1
x2).
3-85
Installation of MFP Options
D093/D094