Printer Image Setting Error; Print Start Error; Image Write Start Error - Ricoh D093 Service Manual

Procedure 4
If "Procedure 3" does not solve the problem, replace the HDD.
SC954 D

Printer Image Setting Error

The IPU did not issue the signal required to start image processing for
the printing mode within 60 s after the paper stops for registration.
Software defective
Replace the software (all firmware modules).
SIPU defective
965 D

Print Start Error

During print processing, another command to start printing was received.
Printer firmware defective
Update printer firmware
967 D

Image write start error

The paper stopped at the registration sensor and roller for buckle adjustment
but the signal to start image writing was not received within 60 sec.
Printer firmware defective
Update printer firmware
Check the connections between the LPH sections (x3) and the VDB
LPH defective
VDB defective
MCU defective
SM 7-47
Service Call Tables
D093/D094