Bluetooth Not Used - Ricoh D093 Service Manual

Installation Date
5849
Displays or prints the installation date of the machine.
1 Display
Displays the installation date. The installation date is set automatically after
test copies are done at the installation site.
2 Switch to Print
Determines whether the installation date or total count is printed on the total
counter printout.
[0 to 1/0/1]
0: Off. No Print
1: On. Print
3 Total Counter
Displays the total count starting from the installation date (SP5849-1).

Bluetooth Not Used

Sets the operation mode for the Bluetooth Unit. Press either key.
5851
[0 to 1/0/1]
[0:Public] [1: Private]
5853 Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto
the hard disk so that these stamps can be used by the system. The customer will
not be able to use these stamps ("Confidential", "Secret", etc.) until this SP has
been executed.
Note:
This SP must always be executed after the HDD has been reformatted or
replaced.
Always switch the machine off and on after executing this SP.
SM Appendix 2-177
SP5-xxx Mode
CTL
CTL
D093/D094