Paper Exit Tray Selection - Ricoh A284 Service Manual

PAPER EXIT TRAY SELECTION

1.2 PAPER EXIT TRAY SELECTION
[C] Longer than A3, DLT
The machine allows selection between the paper tray exit trays: Int. Tray [A]
(standard output tray), Int. Tray 2 [B] (optional one-bin tray), and Ext. Tray [C]
(finisher or optional external output tray). If the sub-scan length is more than 330
mm, the exit tray is as shown below, if the relevant options have been installed.
Installed options
Bridge unit & Finisher (1,000-sheet)
Bridge unit & Finisher (3,000-sheet)
Bridge unit & optional ext. output tray
A283/A284
[A] A4, LT
Exit tray for paper longer than 330 mm
Int. Tray [A]
Ext. Tray [C]: The finisher upper tray
Ext. Tray [C]: Ext. output tray
1-4
[B] A3, LT
A284V508.WMF
SM