Start-In-Gear Protection Lever Inspection; Drive Pawl And Spring Inspection; Bushing Inspection; Sheave Drum Inspection - Yamaha F15A Service Manual

POWR
MANUAL STARTER (MH MODELS)

Start-in-gear protection lever inspection

1. Inspect:
9 Start-in-gear protection lever
Cracks/wear/damage → Replace.

Drive pawl and spring inspection

1. Inspect:
9 Drive pawl
Cracks/wear/damage → Replace.
9 Drive pawl spring inspection
Damage → Replace.

Bushing inspection

1. Inspect:
9 Bushing
Cracks/damage → Replace.

Sheave drum inspection

1. Inspect:
9 Sheave drum
Cracks/wear/damage → Replace.
Spiral spring inspection
1. Inspect:
9 Spiral spring
Damage → Replace.

Starter rope inspection

1. Inspect:
9 Starter rope
Frays/wear/damage → Replace.
NOTE:
9 When replacing the rope, cut it to the
specified length and then burn its end so
it will not unravel.
9 Apply water resistant grease onto the
new starter rope.
Starter rope length:
1,800 mm (70.9 in)
5-5
E