Counter Rotation Models; Start-In-Gear Protection; Engine Oil Requirements - Yamaha FL200C Owner's Manual

Hide thumbs Also See for FL200C:
Table of Contents

Advertisement

Specifications and requirements
Yamaha recommends to use a propeller suit-
able for the "Shift Dampener System (SDS)".
For further information, consult your Yamaha
dealer.
To check the propeller, see page 73.
1. Propeller diameter in inches
2. Propeller pitch in inches
3. Type of propeller (propeller mark)
EMU36312

Counter rotation models

Standard outboard motors rotate clockwise.
Counter rotation models rotate counterclock-
wise and are typically used in multiple motor
setups.
On counter rotation models, be sure to use a
propeller intended for counterclockwise rota-
tion. These propellers are identified with the
letter "L" after the size indication on the pro-
peller. WARNING! Never use a standard
propeller with a counter rotation motor, or
a counter rotation propeller with a stan-
dard motor. Otherwise the boat could go
in the direction opposite of that expected
(for example, reverse instead of forward),
which could lead to an accident.
For instructions on propeller removal and in-
stallation, see page 73 and 74.
EMU25771

Start-in-gear protection

Yamaha outboard motors or Yamaha-ap-
proved remote control units are equipped
with start-in-gear protection device(s). This
12
feature permits the engine to be started only
when it is in neutral. Always select neutral be-
fore starting the engine.
EMU41953
Select an oil grade according to the average
temperatures in the area where the outboard
motor will be used.
3
1
2
ZMU07044
If oil grades listed under Recommended en-
gine oil grade 1 are not available, select an al-
ternative
Recommended engine oil grade 2.
Recommended engine oil grade 1
[EWM01811]

Engine oil requirements

Recommended engine oil:
YAMALUBE 4 or 4-stroke outboard
motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Recommended engine oil grade 2:
SAE 15W-40/20W-40/20W-50
API SH/SJ/SL
Engine oil quantity (without oil filter
replacement):
4.5 L (4.76 US qt, 3.96 Imp.qt)
Engine oil quantity (with oil filter re-
placement):
4.7 L (4.97 US qt, 4.14 Imp.qt)
oil
grade
SAE
-4
14
32
50
-20
-10
0
10
10W–30
10W–40
5W–30
listed
under
API
68
86
104
122˚F
20
30
40
50˚C
SG
ZMU06854
SE
SF
SH
SJ
SL

Advertisement

Table of Contents
loading

This manual is also suitable for:

F200cF225cF225bFl225b

Table of Contents