Ricoh B230 Service Manual page 1207

1.5 DIP SWITCHES
SW100: Adjust the staple position for booklet mode
No.
1 ON: 0.3 mm
2 ON: 0.6 mm
3 ON: 1.2 mm
Direction
4
OFF: Towards the trailing edge, ON: Towards the leading edge
SW101: Adjust the fold position
No.
1 ON: 0.2 mm
2 ON: 0.4 mm
3 ON: 0.8 mm
Direction
4
OFF: Towards the trailing edge, ON: Towards the leading edge
SW102: Move the tray position
No.
OFF → ON → OFF
1
Turn the switch from off to on, then turn it to off again. Then, the tray moves down to
the shipping position
2 Not used
After you change any of these dip switch settings, open and close the finisher
cover to activate the new setting. It is not necessary to turn the main power off/on.
SM
Function
Function
Function
27
DIP Switches
B793