Ricoh B051 Service Manual page 223

Rev. 04/2004
Mode No.
3
(Class 1, 2, and 3)
004* Environment Change
1 Temperature
2 Humidity
005* Process control Pre-Rotate
1 Process control Pre-
Rotate
006* Density Adjustment
1 M/A Correction
2 Highlight Correction
125
Process control/LD: Pre-ACC self-check setting
1 ACC self-check setting
901
LD-POWER
1 LD 1
2 LD 2
SM
CÓPIA NÃO CONTROLADA
Sets the temperature/humidity change that triggers
process control (process control is done if temperature
or humidity has changed by this amount since the
previous process control).
[0 ~ 100 / 15 / 1°C/step]
[0 ~ 100 / 150 / 1 g/m
PCU and development unit idling is done before process
control. This value determines the amount of idling
rotation.
[1 ~ 5 / 1 / 1 turn/step]
1 turn: A3 length
Select the toner density compensation level for process
control. If prints are not dark enough when making multi-
print jobs, increasing this value ensures that prints will
be darker after the next process control. The default (0)
is for no correction.
SP3-006-1: Use this one if the density of solid areas is
not satisfactory.
SP3-006-2: Use this one if the density of highlight areas
is not satisfactory.
[0 ~ 3 / 0 / 1/step]
0: None
1: Weak
2: Medium
3: Strong
The higher the value, the darker the prints will be.
Enables/disables process control execution before ACC.
[0 ~ 1 / 1 / 1/step]
0: Disabled
1: Enabled
Specifies the LD power. DFU
[0 ∼ 65535 / 716 / 1 /step]
5-25
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function / [ Setting ]
3
/step]
B051/B052