Ricoh B051 Service Manual page 221

Rev. 04/2004
SP3-XXX: (Process)
Mode No.
3
(Class 1, 2, and 3)
001 Process Control
1 Execute
2 Display
SM
CÓPIA NÃO CONTROLADA
Does a forced process control, and displays the result as
one of the following codes.
Displays the completion code.
0: Normal termination
103: Error (ID sensor inactive → Defective ID sensor,
Defective circuit, Defective BCU board)
104: Error (ID sensor unable to receive light → Defective
OPC belt, Dirty OPC belt, Defective ID sensor, Defective
circuit, Defective BCU board)
105: Error (ID sensor unable to receive reflection from
OPC → Same as "104")
110: Error (Cyan: ID sensor unable to detect correct
image)
111: Error (Magenta: ID sensor unable to detect correct
image)
112: Error (Yellow: ID sensor unable to detect correct
image)
113: Error (Cyan: ID sensor unable to detect correct
image)
114: Error (Magenta: ID sensor unable to detect correct
image)
115: Error (Yellow: ID sensor unable to detect correct
image)
116: Error (Black: ID sensor unable to detect correct
image)
118: Error (Black image not detected)
123: Error (Development bias error; Black ID sensor
unable to detect correct image)
Solutions for codes 110 to 123:
Poor connection to the development unit
Dirty development bias terminal
Abnormal development bias
PCU not installed correctly
LD unit defective
Abnormal charge corona voltage
Defective BICU
5-23
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function / [ Setting ]
B051/B052