Ricoh B051 Service Manual page 203

Rev. 04/2004
Mode No.
1
(Class 1, 2, and 3)
003* 4 Tray: Small Size
5 By-pass: Plain
6 By-pass: Thick
7 By-pass: OHP
8 Duplex
105* Fusing Temperature
1 Heating: Idling
2 Heating: Ready
3 Heating: Standby
4 Heating: Plain/1 Color
5 Heating: Plain/Full
Color
6 Heating: Middle
Thick/1 Color
7 Heating: Middle
Thick/Full Color
8 Heating: Thick/1 Color
9 Heating: Thick/Full
Color
10 Heating: OHP/1 Color
11 Heating: OHP/Full
Color
12 Heating: Duplex/1
Color
SM
CÓPIA NÃO CONTROLADA
[–4 ~ 6 / 0 / 1 mm/step]
Small Size includes LT long edge feed and smaller.
[–4 ~ 6 / 0 / 1 mm/step]
[–4 ~ 6 / –2 / 1 mm/step]
[–4 ~ 6 / –2 / 1 mm/step]
[–4 ~ 6 / 0 / 1 mm/step]
Sets the temperature at which the heating roller starts
idling.
[100 ~ 180 / 145 / 1°C/step]
Sets the temperature at which the heating roller enters
the print ready condition.
[100 ~ 180 / 155 / 1°C/step]
Sets the heating roller temperature for the ready
(standby) condition. After the main switch has been
turned on, the machine enters this condition when the
heating roller temperature reaches the temperature
specified in this SP mode. When the machine is
recovering from energy saver or auto off mode, the
machine becomes ready when both heat and pressure
roller temperatures reach the specified temperature.
Pressure roller: SP1-105-16
[100 ~ 180 / 160 / 1°C/step ]
Sets the heating roller temperature for thin paper in
single-color mode.
[120 ~ 190 / 155 / 1°C/step]
Sets the heating roller temperature for thin paper in full-
color mode.
[120 ~ 190 / 160 / 1°C/step]
Sets the heating roller temperature for normal plain
paper in single-color mode.
[120 ~ 190 / 165 / 1°C/step]
Sets the heating roller temperature for normal plain
paper in full-color mode.
[120 ~ 190 / 170 / 1°C/step]
Sets the heating roller temperature for thick paper in
single-color mode.
[120 ~ 190 / 165 / 1°C/step]
Sets the heating roller temperature for thick paper in full-
color mode.
[120 ~ 190 / 170 / 1°C/step]
Sets the heating roller temperature for OHP sheets in
single-color mode.
[120 ~ 190 / 165 / 1°C/step]
Sets the heating roller temperature for the OHP sheets
in full-color mode.
[120 ~ 190 / 175 / 1°C/step]
Sets the heating roller temperature for duplex printing
(both sides) in single-color mode.
[120 ~ 190 / 150 / 1°C/step]
5-5
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function / [ Setting ]
B051/B052